Topcon RL-VH3 Series Quick Start Guide

All of the features you would expect ... and more!
Introducing the next generation interior lasers from Topcon, the RL-VH3 series.
This is the second generation to feature Topcon’s exclusive ultra-visible Green Beam®
(RL-VH3G). It quadruples beam brightness so you’ll never lose the beam, even in
direct sunlight. The RL-VH3 series is equipped with many "Smart" features, improved
battery life, excellent spot quality, and a full function optional remote, the RL-VH3
series is the only choice. It’s the one-man layout tool you’ll have to see to believe!
Level Floors to Ceilings and Everything in Between
For horizontal levelling and alignment, Topcon’s unique scanning technology increases
levelling production on ceiling grids, soffit elevations, and raised access flooring.
The RL-VH3 greatly simplifies any job requiring a horizontal reference level or slope.
Finish Walls Faster and Better
Set-up any RL-VH3 on its side (all have a built-in floor mount) to manage vertical layout and
alignment. The unique automatic plumb beam instantly establishes initial layout points and
the laser’s rotation transfers these points to any surface on the job to position studs, drop
walls, or bulkheads. With the 90° beam emitted from the top and bottom of the RL-VH3 you
can speed the pace of any 90° layout or alignment job, quickly establishing corners and Tee’s.
Simply smarter...
SmartScan™
A rotating laser beam is
great, but when you need
a concentrated laser line,
Topcon’s SmartScan lets
you draw a line of focused
laser light on any surface,
to any length you need.
And it stays there as long
as you need. All done
automatically from the
target.
SmartLine™
Aligning the beam for
vertical operation is,
you guessed it, automatic.
Simply place the target at
your farthest control point
and let the laser do the rest.
The beam automatically
centers on the target. You
get one person alignment
at record breaking speed.
SmartSlope
Raking-in a beam to match
a slope has always been
hard, usually requiring two
people and a lot of guess
work. Not anymore. Just like
SmartLine, put the target
at the right elevation and
the beam automatically
drives to it and stays there.
And it works for either
compound or single slopes.
One person. Accurate. Easy.
SmartPlumb
Vertical setups are fast and
accurate because the beam
automatically gives you a
plumb point directly below
the aperture. Just press
the SmartPlumb button
and the beam plumbs
down. You get the perfect
setup point, plus a scan
line for roughing in. It’s
great for tripod setups.
Only Topcon gives you these "world’s first" features to make your work easier and more productive than ever.

Topcon RL-VH3 Series Specifications

General

Brand	Topcon
Model	RL-VH3 Series
Category	Measuring Instruments
Language	English