Need help?Do you have a question about the Topcon RT-5SW and is the answer not in the manual?
General| Type | Robotic Total Station |
|---|---|
| Angle Accuracy | 5" |
| Distance Measurement Accuracy (Prism) | ± (2 mm + 2 ppm) |
| Accuracy | ± (2 mm + 2 ppm) |
| Laser Diode | 635 nm |
| Measurement Range | 5, 000 m (with prism) |
| Display | LCD |
| Working Range | 5, 000 m (with prism) |
| Battery Type | Li-ion |
| Operating Temperature | -20°C to +50°C |
Important warnings regarding fire, electric shock, and laser hazards.
Cautions related to hazardous radiation, electric shock, and physical injury.
Information on laser output, classification (Class 3R), and eye exposure warnings.
Describes the function of each key on the RC-300W remote controller.
Instructions for using the RC-300W remotely and its features.
Steps to prepare the instrument and target for automatic alignment.
Detailed instructions for initiating and performing the automatic alignment process.
How to perform automatic grade setting after alignment.
Instructions for setting grades for single and dual axes.
Explains the Height Alert function and its associated warnings.
Lists and briefly describes the seven user-configurable function modes.
Details the two laser output power levels and their use.
Explains sensitivity levels for auto-leveling and manual operation.
How to activate and use the Height Alert function.
Detailed steps for checking and performing horizontal calibration.
Steps for selecting an axis and using the sensor to detect the laser beam.
How to confirm rotation and auto-leveling after calibration steps.
Procedure for adjusting the laser beam position for calibration.
How to finish calibration and handle potential correction value errors.
Lists error codes for RT-5SW and their corresponding solutions.
Lists error codes for RC-300W and their corresponding solutions.
To Next Page
