37
How to set the options
In the Function Mode [F] there are three display screens on the RC-300W as shown.
Use the arrow keys to scroll to each screen and select items.
1 Press the [F] key to enter Function Mode.
The current setting for the instrument will
be displayed.
2 Select an item (Power, Level, Alert, Com,
Mask, Target, CH) by pressing the Up or
Down arrow keys.
3 After the desired item is selected, use the
Right and Left arrow keys to select the
desired setting.
Items Contents
Laser Output Power
Sensitivity Level
Height Alert
Alarm Signal
Mask Mode
Page 1
Page 2
Setting the Target
Channel Setting of
RT-5SW
Page 3
To Next Page
Loading...
