Need help?Do you have a question about the Topcon RL-HV Series and is the answer not in the manual?
General| Laser Class | Class 2 |
|---|---|
| IP Rating | IP66 |
| Type | Rotary Laser |
| Range | Up to 800m diameter (with detector) |
| Self-Leveling Range | ±5 degrees |
| Rotation Speed | 600 rpm |
| Laser Diode | 635 nm |
| Power Source | Rechargeable Ni-MH battery pack or Alkaline batteries |
| Operating Temperature | -20°C to 50°C |
| Storage Temperature | -20°C to +60°C |
Defines symbols used in the manual for warnings and instructions.
Provides clarification on terminology and illustrations used throughout the manual.
Explains the meaning of WARNING, CAUTION, and prohibition symbols used in the manual.
Covers general warnings and cautions regarding unit operation and power supply.
Details safety measures related to tripod setup, handling, and stability.
Outlines safety considerations for using Bluetooth connectivity, especially near medical devices.
Instructions and temperature ranges for safe battery charging.
Information on battery expendability and warranty coverage.
Guidance on protecting the instrument from vibration and impact during transport.
Precautions regarding condensation due to temperature fluctuations.
Guidelines for storing the instrument safely, avoiding sunlight and extreme temperatures.
Measures to maintain IP66 rating and prevent damage from moisture or dust.
Additional safety tips, including handling sensitive devices and reflective surfaces.
Recommends wearing protective gear such as safety shoes and helmets during operation.
Instructions for cleaning and maintaining the instrument and carrying case.
Notes on regulations, authorization, and potential interference for Bluetooth connectivity.
Discusses potential interference sources and mitigation strategies for Bluetooth communication.
Details on laws and regulations governing export and re-export of the product.
Compliance requirements for wireless communication modules and export.
Manufacturer's disclaimer for damages, losses, and product failures.
Critical warnings about hazardous radiation exposure and proper use of controls.
Important cautions for safe laser beam operation, handling, and disposal.
Introduces the RL-HV rotating laser instrument.
Labels and identifies the main components of the RL-HV instrument.
Explains the control panel layout and function of each key on the RL-HV.
Describes various indicators on the RL-HV display, including battery status and speed.
Introduces the LS-80X level sensor used with the RL-HV.
Labels and identifies the main components of the LS-80X level sensor.
Explains the display and warning indicators on the LS-80X level sensor.
Details the different precision modes and their corresponding display indications.
Step-by-step guide for charging the rechargeable battery pack.
Explains the meaning of LED indicators during the battery charging process.
Procedures for inserting and removing the battery pack and holder.
Instructions for replacing dry batteries in the RL-HV instrument.
Instructions for replacing dry batteries in the LS-80X level sensor.
Guides on setting up the instrument on a tripod or surface for horizontal rotation.
Illustrates an example of setting up and operating for horizontal rotation.
Instructions for setting up the instrument for vertical rotation.
Explains the function that alerts the operator to instrument disturbance.
Steps to reset the instrument after a shock detection.
Information on connecting the RL-HV to smart devices via Bluetooth.
Steps to install the control application 'Laser Manager'.
Procedure for establishing communication between RL-HV and a device.
Introduces methods for setting grades on the laser beam.
Detailed steps for setting grades on the 1S model.
Procedure to reset grade values to zero.
Detailed steps for setting grades on the 2S model.
Illustrates setting grades for accurate grade direction.
Describes the mode for aligning laser calibration to worked grade.
Explains how arrow keys control laser beam grading direction.
Describes display elements and status during matching mode.
Steps to exit the matching mode and set grade values.
Guides on manually aligning the vertical laser beam.
Explains how arrow keys control laser beam movement in line control mode.
How to shut off laser emission in unnecessary directions.
How to set the rotary head speed to 600 or 300 RPM.
How to switch between self-leveling and manual modes.
How to enable or disable the height alert function.
Lists error codes and recommended troubleshooting actions.
Procedure for checking and adjusting horizontal rotation accuracy.
Details how to check for grade errors in horizontal rotation.
Steps to adjust horizontal rotation if errors are detected.
Procedure to check for cone errors in horizontal rotation.
Method to check for errors in grade setting accuracy.
Introduction to vertical calibration procedures.
Steps to check the current vertical calibration status.
Procedure for adjusting vertical calibration.
Details of the laser source, its classification, and output power.
Specifications for instrument accuracy and grade setting ranges.
Technical details of the Bluetooth module, including version and frequency band.
Information on power sources and battery specifications, including capacity and size.
Details on charging times and temperature ranges for operation and storage.
Specifications for environmental resistance (IP66) and mounting thread.
Regulatory compliance information for the USA regarding FCC Part 15 and RF exposure.
Health warning regarding chemicals, including Lead, in California.
Regulations and process for battery recycling in specific US states.
Regulatory compliance for Canada regarding interference-causing equipment.
Compliance with EU/UK Electromagnetic Compatibility and Radio Equipment directives.
Information on Waste Electrical and Electronic Equipment disposal in the EU.
Guidelines for proper battery disposal and chemical content warnings.
Information on hazardous substances in electronic products for China.
To Next Page
