34
8. CHANGING THE SETTINGS
After pressing the key, pressing the or key will change the menu items and setting can be
performed for the functions listed below.
For Matching Mode, see "■ Matching Mode (Manual Slope)"
Depending on the status of the location where the instruments are used, laser beam emission to unnecessary
direction can be shut off.
1. Press key to display the menu screen.
2. Use the key to position on the Mask display and press
the key.
3. Select the direction you desire to mask using the arrow keys.
Each press repeats mask activating/releasing.
8.1 Masking (Laser beam shutter) setting
Matching ModeSafety lock ON/OFF setting Masking setting
Speed settingManual Mode ON/OFF setting
Arrow keys and masking setting
directions
RL-HV upper surface diagram
and masking directions
The state when masking is
not activated. (Laser beams
are emitted to all directions.)
The status in which the Y+
direction is masked.
(Laser beam is shut off in the
Y+ direction.)
Displays the masking direction
To Next Page
Loading...
Need help?
General
