12
Key Functions
Enter key End Operation of Data Input and Sends data to the instrument.
Escape key Cancels input or Escape to Previous status.
Automatic alignment/
Automatic grade set
key
Executes Automatic alignment / Automatic grade set mode.
Mask key
(Beam shutter)
Sets the laser mask (shutter).
Function key Function mode. The following functions can be set.
Laser output power/ Sensitivity level/ Height Alert/ Alarm signal
/ Masking mode/ Setting the target/ Channel setting
XY key Sets each grade axis.
Speed key Changes the rotary head speed.
300/600/900 r.p.m.
Arrow keys Changes the function page / Selects the items.
Inputs the grades of X Y axis.
Sets the masking direction.
Power switch On/Off of the RT-5SW and RC-300W.
(RC-300W has auto-cut off 60 seconds function)
To Next Page
Loading...
