40
RT-5SW
Dry battery
1 Remove the battery cover by turning the battery
cover knob to “OPEN”.
2 Remove the old batteries and replace with four (4)
new “D” cell alkaline batteries making sure each
is placed in the proper direction as indicated.
3 Replace the battery cover and turn the knob to
“LOCK”.
After replacing the batteries in the RT-5SW, re-attach the RC-300W once (if it was
detached during battery replacement) to re-enter the status of the RT-5SW into the RC-
300W.
Replace all 4 batteries with new ones.
Do not mix old batteries and new ones.
How to replace dry batteries
To Next Page
Loading...
