Topcon RT-5SW - Sample Display

11
Sample Display
Function mode
Automatic alignment
mode
Mask mode
Normal display
X axis grade
Y axis grade
Selected laser output power
Hi:4.5mW Lo:2.5mW
Selected sensitivity level
1,2, M (M:Manual)
Leveling
(Blinks during leveling)
Transmission and
reception display
Automatic alignment mark
Automatic grade setting mark
ON : Alignment is done.
OFF : Alignment is not done.
Battery remaining
RT : RT-5SW
RC : RC-300W Remote controller
Transmitting
Complete
Incomplete
Mask mode
Automatic grade setting
mode
Channel