50
4 Set X axis grade to 1.00%. Align read the elevation of the laser beam in millimeters at Nail 1
and Nail 2. Designate these elevations as “h3” at Nail 1, and “h4” at Nail 2.
5 Using the elevation readings for h1, h2, h3 and h4, complete the equation below.
If the calculated result is the range of 0.990% - 1.010%, the instrument is normal.
Repeat the procedure aligning the “Y-” axis on the line created by Nail 1 and Nail 2.
Example; h1 = 1370; h2 = 1390; h3 = 1362; h4 = 1080
X%=(1390-1080)-(1370-1362)
X 100 = 0.010066 X 100 = 1.006%
30000
The X axis of instrument is normal because 1.006 is within the range 0.990 to 1.010.
If the calculated result for either axis is out of the range, contact your dealer or Topcon.
Nail 1 Nail 2
To Next Page
Loading...
