Topcon RT-5SW - Powering ON;OFF during Auto-Alignment

18
Powering ON/OFF while in Automatic alignment mode
If the Automatic alignment / Automatic grade setting function has been used to precisely align the
grade axis, the alignment setting is maintained when the instrument is turned off. This allows you
to turn off the RT-5SW to save power during non-use times without the need to re-align when the
unit is turned back on.
When power is turned back on after Automatic alignment, the following display will be shown.
Press the allow keys to select No or YES, then press the [ENT] key. NO maintains the current
alignment setting. YES clears the alignment and returns the instrument to the default XY
alignment. (see “Automatic Alignment” and “Executing Automatic Alignment” sections.)