47
BASIC OPERATIONS
When the xenon charging display flickers on the color LCD monitor, photography is not
possible even by pressing the .
Wait until the xenon charging display turns on before you attempt to take the next image.
11 The captured image is stored in the external recording device and displayed on the color
LCD monitor.
If the light intensity of the image is insufficient, compensate for it by pressing the
, and repeat the centering and photography procedure.
12 To return to the Monitor screen from the photographed image on the color LCD monitor,
press the again.
When using the CF CARD or USB memory, the image is stored at this time. When a dig-
ital printer is connected to the instrument, the image is printed at this time.
When you do not want to print the image, press the . The fol-
lowing screen appears. Select "SAVE" to store the image. Select "DELETE" not to store
the image. Select "CANCEL" to return to the Preview screen.
PHOTOGRAPHY SWITCH
AUTO
FSP
Xenon charging display
FLASH LEVEL SWITCH
PHOTOGRAPHY SWITCH
IMAGE DELETION SWITCH
F
D
SAVE
EXIT
DELETE
To Next Page
Loading...
