iii
Alert Symbols
Supplementary information to help set up and maintain the system and/or information that will benefit
system operation, performance, measurements or personal safety.
CAUTION: This indicates that an action could affect system operation, system
performance, data integrity or personal health.
WARNING: This indicates that an action can/will result in system damage, loss of
data, loss of warranty or personal injury.
CRITICAL: This indicates a critical action that must be taken to avoid possible
serious injury or death.
PROHIBITED: UNDER NO CIRCUMSTANCES should this action be performed
Operator Safety
WARNING: DO NOT remove or obscure safety signs. Replace any safety signs
that are not readable or are missing. Replacement signs are available from your dealer in
the event of loss or damage.
WARNING: It is YOUR responsibility to read and understand the safety sections
in this book before working on the equipment. Remember that YOU are the key to safety.
Good safety practices not only protect you, but also the people around you. Study this manual as part of your safety
program. This safety information only relates to Topcon equipment and does not replace other usual safe work
practices.
Information in this manual is current at the time of publication. A system may vary slightly. The manufacturer
reserves the right to redesign and change the system as necessary without notification.
Preparation for Operation
PROHIBITED: Never operate the vehicle with any panels or guards removed. If the
removal of panels or guards is necessary to make a repair, they MUST be replaced before
operation.
To Next Page
Loading...
