v
Implements equipped with an electrical system, disconnect the entire implement - tractor harness
connections before performing electrical system service and maintenance or welding on the implement.
CRITICAL: Install and handle brackets and electronic system components safely
Install and handle all vehicle mounting brackets in a safe manner. Serious injury can result from falling
while performing service, installations or maintenance. Use secure vehicle handholds and footholds where
specified by the manufacturer. If footholds and handholds do not allow access to the necessary work area;
use a ladder, scaffold or other means of safe, secure access. Do not commence work in wet, windy or icy
conditions.
Inside and outside the cabin, ensure that the harnesses are routed safely out of the way of operators and
will not be damaged in normal use.
Attach the power connector at the end of installation to prevent any risk of electrical damage.
To Next Page
Loading...
