Topdon BT50 - 1. Battery Test: Preparation and Steps; 1.1 Before Conducting Test; 1.2 Performing the Test

EN | 11
1.1 BEFORE TEST
The engine and all other accessory loads must be OFF in
order to get accurate results. Turn on the vehicle headlamps
for 2~3 minutes until the battery voltage drops back to
normal value if the battery is just fully charged.
1.2 STEPS
1) Press the "OK" button to display the main menu. Then
select "1. Battery Test" and press the "OK" button to conrm.
2) Press and hold the "▲" or "▼" button to select the "Battery
Type" (specied on the battery rating label), then press "OK"
to continue.
3)Press and hold the "▲" or "▼" button to select the correct
testing standard (specied on the battery rating label), then
press the "OK" button to continue.
6. About