Need help?Do you have a question about the Topdon BT200 and is the answer not in the manual?
General| Category | Test Equipment |
|---|---|
| Type | Battery Tester |
| Display | LCD |
| Weight | 200g |
| Test Range | 100-2000 CCA |
| Functions | Cranking test, charging test |
| Supported Battery Types | GEL, EFB |
| Supported Standards | CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE |
| Battery Capacity | Not applicable |
| Bluetooth Version | Not applicable |
| Operating Temperature | -20°C to 50°C (-4°F to 122°F) |
Detailed steps for performing a battery test on 12V systems, including pre-test checks and connection procedures.
Instructions for conducting cranking tests on 12V and 24V batteries, covering pre-test conditions and procedures.
Guide to performing charging system tests for 12V and 24V batteries, detailing engine ON status and RPM adjustments.
Procedure for accessing and reviewing past test results stored within the battery tester.
Instructions for changing the display language of the battery tester.
To Next Page
