Need help?Do you have a question about the Topdon BT50 and is the answer not in the manual?
General| Type | Battery Tester |
|---|---|
| Display | LCD |
| CCA Range | 100-2000 CCA |
| Application | Battery testing |
| Compatibility | 12V batteries |
| Power Source | Battery under test |
| Battery Types | AGM, GEL, EFB |
Read all safety instructions and messages before using the product for user safety and vehicle protection.
Operate in well-ventilated areas, wear eye protection, be aware of moving parts and hot engine components.
Follow gear selection, multimeter use, no smoking, clothing, cord, and battery acid handling precautions.
Lists compatible battery types (Flooded, AGM, GEL, EFB) and notes on choosing AGM if unsure.
Lists the included items: TOPDON BT50 Vehicle Battery Tester and User Manual.
Explains the function of navigation, OK, and return buttons on the device.
Describes how to connect the red (positive) and black (negative) clamps to the vehicle battery.
Details connecting clamps and the initial screen display showing voltage.
Explains how to enter the main menu and select options like Battery Test, Cranking Test, etc.
Describes the process of choosing the user's preferred language from a list.
Engine and accessories must be OFF; headlamps may be used to normalize battery voltage.
Steps to select battery type and testing standard from the main menu.
Select the battery rating values (e.g., CCA) as per the battery label.
Shows how test results (Health, Charge, Internal Resistance, Rated) are displayed for good batteries.
Illustrates the display message indicating the battery needs to be replaced.
Engine and accessories must be OFF for accurate cranking test results.
Steps to select Cranking Test and start the engine within 30 seconds.
Displays test results (TIME, VOLTAGE) and provides a table for conclusion (GOOD, NORMAL, CRANKING LOW).
The vehicle engine must be ON for the charging test.
Steps to conduct the Ripple Test, requiring engine start and RPM adjustment.
Shows how charging test results (Loaded, Unloaded, Ripple) are displayed.
Provides a table to interpret results based on battery voltage with headlamps and A/C off.
Describes selecting "Review Data" from the main menu to view previous test results.
Addresses testing in-vehicle, accuracy, battery compatibility, and built-in protections.
Explains how to confirm battery health using SOH, SOC, CCA, voltage, and internal resistance.
Explains how SOC estimates remaining capacity, but CCA and Internal Resistance are crucial for full analysis.
Lists key technical details including working temperature, voltage, dimensions, and testing range.
Outlines the three-year limited warranty, coverage, and conditions that void the warranty.
To Next Page
