Need help?Do you have a question about the Topdon AL500B and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Operating Temperature | -10°C to 50°C |
| Operating Voltage | 12V |
| Connectivity | USB |
| Storage Temperature | -20°C to 70°C |
| Protection Features | Short circuit |
Emphasizes understanding all safety instructions before operation.
Overview of the screen, buttons (HELP, I/M, EXIT, OK, Arrow Keys), and 3-color LED indicator status.
Accesses generic OBD-II data, including DTCs and datastream.
Performs battery voltage, CCA, and health tests.
Checks emission system readiness and monitor status.
Steps and precautions before connecting the scan tool to a vehicle.
Steps to establish communication and retrieve Diagnostic Trouble Codes (DTCs) from the vehicle's ECU.
Steps to clear or reset emission-related diagnostic data after repairs.
Verifies if emission-related systems are operating properly for testing.
Critical safety warning for live data streaming while driving, requiring a second person.
Explains what Freeze Frame data is and when it's captured when the MIL is on.
Describes the purpose of the O2 Sensor Test function.
Crucial instruction for connecting battery test clamps correctly to terminals.
Critical safety and accuracy requirement for performing a cranking test.
Essential prerequisite for conducting a charging system test.
Steps to download the update tool from the official website.
Connection method for updating the tool.
Steps to use the PC Suite software for updates.
Troubleshooting steps for system freezing during data stream reading.
How to interpret battery test results for good/bad confirmation.
To Next Page
