26
You can select specic data stream options to be viewed on the left.
Note: A maximum of 12 data streams can be displayed in this module.
Tap “Min/Max” to dene the maximum/minimum value. Once the value goes
beyond the specied value, the data will be shown in red.
Tap “<“ on the right side of the screen. The following page will appear:
•
Report: To save the number of current data streams.
•
Record: To record the diagnostic data for further analysis.
•
: To view single data steam displayed in wave patterns. Tap “ ”.
The following page will appear:
To Next Page
Loading...
