Need help?Do you have a question about the Topdon Phoenix Elite and is the answer not in the manual?
General| Brand | Topdon |
|---|---|
| Model | Phoenix Elite |
| Category | Diagnostic Equipment |
| Language | English |
Initial greetings and general information about the device.
List of items included in the product package.
Supported communication protocols for vehicle diagnostics.
Critical operational warnings and disclaimers for safe usage.
Explanation of the OBDII system and its monitoring capabilities.
Details on Diagnostic Trouble Codes and their structure.
Identification and function of tablet buttons, USB, and charging ports.
Details on the touch screen, rear camera, and loudspeaker.
Information on the adjustable stand for device placement.
Explanation of LED indicators for power, vehicle communication, and USB.
Details on the DB30 diagnostic port and Type-C port functions.
Steps before connecting: ignition off, locating DLC port, and plugging in VCI.
Charging the tablet, powering on, and selecting the operating language.
Configuring the time zone and connecting to a Wi-Fi network.
Reviewing terms, accepting agreement, and creating a TOPDON account.
Activate and bind the VCI dongle using serial and activation codes.
Initiates automatic vehicle VIN reading and diagnosis.
Using VINSCAN with camera for automatic vehicle identification.
Selecting make, model, and year for diagnostic scanning.
Using the camera to scan VIN characters for vehicle recognition.
Manually inputting the vehicle VIN if camera scan fails.
Selecting vehicle make, model, and year for detailed diagnostics.
Selecting the appropriate diagnostic software version for use.
Quickly detects vehicles and displays health reports with fault codes.
Automatically scans all vehicle systems for potential issues.
Manually selecting vehicle control systems for focused scanning.
Retrieves current version information from the vehicle's ECU.
Displays Diagnostic Trouble Codes (DTCs) from the ECU memory.
Removes DTCs from the ECU memory of the selected system.
Displays real-time vehicle data and parameters.
Options for viewing data streams: Value, Graph, or Combined.
Records current data stream for future analysis and comparison.
Compares saved data stream samples against standard ranges for analysis.
Displays selected data streams as waveforms and merged graphs.
Options to save data streams as reports or record for further analysis.
Viewing data in waveforms and setting min/max values for analysis.
Tests specific subsystems or components by checking output elements.
Covers data writing operations like ECU calibration and programming.
Resets the oil service lamp based on driving conditions.
Initializes throttle actuator for accurate idle control.
Resets steering angle to zero for straight-line driving.
Resets battery monitoring unit after battery replacement.
Performs diagnostic tests on the Anti-lock Braking System.
Resets brake pads after replacement or indicator light activation.
Removes particulate matter from the trap via oxidation methods.
Performs tooth learning for the engine to resolve MIL issues.
Matches anti-theft system components after replacement.
Writes injector codes to the ECU for precise fuel injection.
Resets tire pressure indicators and warnings.
Adjusts vehicle height sensor for accurate level calibration.
Initializes the adaptive headlamp system for optimal lighting.
Improves gear shifting quality through gearbox self-learning.
Configures sunroof lock, tilt, and temperature settings.
Learns the EGR valve's operation after cleaning or replacement.
Corrects or writes odometer values to reflect actual mileage.
Resets airbag data to clear collision fault indicators.
Disables transport mode to restore normal vehicle operation.
Sets or learns Air/Fuel ratio parameters for engine management.
Enables or disables the automatic start-stop function via ECU settings.
Resets catalytic converter learned value after NOx system issues.
Resets urea levels after diesel exhaust treatment fluid replacement.
Matches seats with memory function after replacement or repair.
Activates water pump for cooling system venting.
Sets size parameters for new or modified tires.
Restores ECU memory and power window functions.
Modifies the vehicle's central control panel language.
Initializes AC system after ECU replacement or memory loss.
Monitors cylinder power via crankshaft acceleration.
Regenerates the GPF to maintain exhaust system performance.
Diagnoses and checks the condition of high-voltage batteries.
Manages replacement and matching of intelligent cruise control systems.
Calibrates motor angle to correct rotor position detection deviations.
Anti-theft editor for key chip, ECU, and transmission programming.
Advanced Driver Assistance Systems calibration and setup.
Tests battery performance and determines replacement needs.
Request remote assistance via TeamViewer for troubleshooting.
Submit test records for technical assistance on unresolved issues.
Manage feedback logs, history, and offline lists for technical support.
View definitions of Diagnostic Trouble Codes (DTCs).
Check supported functions and car systems by vehicle make, model, year.
Access learning materials for operating functions on specific models.
Access to the built-in Chrome web browser.
Records diagnosed vehicles, reports, data streams, and screenshots.
Update the diagnostic software and application to the latest version.
Select the correct VCI dongle if multiple are registered on the tablet.
Activate a new VCI dongle using its serial and activation codes.
Repair connector firmware without interrupting device operation.
Organize and manage recorded data stream sample files.
Set and manage personal user information within the application.
Modify the login password for accessing the device.
Configure and connect to available Wi-Fi networks.
Clear cache files to free up storage space on the device.
Manage workshop details and customer data for reporting.
Access saved screenshots and screen recordings.
Adjust units, language, cache, USB mode, and factory settings.
Essential safety precautions for automotive testing.
Important advice for proper and safe use of the diagnostic tool.
Solutions for the tablet not turning on after charging.
Troubleshooting steps for issues during the registration process.
Resolving problems related to logging into the device.
Solutions for equipment activation failures.
Troubleshooting activation problems during software updates.
Solutions for the VCI dongle not receiving power from the vehicle.
Resolving issues with establishing a connection between the tablet and VCI dongle.
Instructions on using only the original TOPDON charger.
Methods to conserve battery power on the tablet.
Troubleshooting steps for errors communicating with the vehicle's ECU.
Procedure for reporting a missing VCI dongle to support.
Resolving diagnostic software errors via feedback or reinstallation.
Addressing issues where software version is inconsistent with the serial number.
Information regarding the device's compliance with FCC regulations.
To Next Page
