32
3.23 AdBlue Reset (Diesel Engine Exhaust Gas Filter)
3.24 Seat Calibration
3.25 Coolant Bleeding
3.26 Tire Reset
3.27 Windows Calibration
3.28 Language Change
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, urea reset
operation is required.
This function can match the seats with memory function that are replaced and repaired.
This function can activate the electronic water pump before venting the cooling system.
This function can set the size parameters of the modied or replaced tire.
This feature can perform door window matching to recover ECU initial memory, and
recover the automatic ascending and descending function of power window.
This function can change the system language of the vehicle central control panel.
You can send the last 20 test records to us by using “Feedback” feature for timely technical
assistance if you encounter any unsolved problems in the diagnostic process.
Tap “Feedback” on the Home Menu. The following page will appear:
4. Diagnostic Feedback
To Next Page
Loading...
