Topens TC175P User Manual

C030500 VER21a
User Manual of the Waterproof Wired Keypad
Model: TC175P
1. Specifications:
 Operating voltage: 12-24VDC ±10%
 Operating current: < 100mA
 User Capacity: 1000 users
 Card type (alternative): EM(ID) card(IC card for options)
 Card reading distance: 1－15CM
 Working temperature: -20℃-+50℃
 Relay output: SPDT, 3A 120VAC/24VDC
2. Factory default settings:
 Programming Password: 123456
 Common Access Password: None
 Backlight: Auto (for options)
 Relay Unlock output: 5 Seconds
 W26 port: Input (for options)
 Security mode: OFF
 Open mode: Card or Access Password, Access Password include Private Access
Password (PIN) and Common Access Password
3. Light and Sound indicates:
Light: red and green
Light Description Access control status
Red light flash every 1 sec （Slow flash） Standby state
Red light is always ON Programming state
Green light is always ON within Open
time
Unlocking state
Green light flash every 0.5sec (Fast flash) Pending further action
Buzzer:
Description Indicates
1 short buzz Valid input

Topens TC175P Specifications

General

Brand	Topens
Model	TC175P
Category	Keypad
Language	English

Summary

Product Specifications and Settings

Device Specifications

Details operating voltage, current, user capacity, card type, reading distance, and working temperature.

Factory Default Settings

Lists default programming password, common access password, backlight, and unlock output settings.

Light and Sound Indicators

Explains the meaning of red and green light flashes and buzzer sounds for status indication.

Wiring and Connectivity

Output Wire Definitions

Defines the function, mark, and color for wires in JP1 and JP2 terminals.

Keypad to Gate/Door Opener Connection

Illustrates connecting the keypad to the opener using board power or external power supply.

Programming and User Management

Password Management

Guides on changing programming password, setting common access password, and adding private PINs.

User Card Management

Instructions for adding, deleting, and managing users via cards and card numbers.

Access Mode and Settings

Details on setting open mode, changing open time, reader settings, and security functions.

Factory Reset Procedures

Steps to reset factory default settings and the programming password.