6 Introduction
28
changes the position of sub-screen clockwise. It is also
used to jump to end of recording during a playback.
29
SAT
swaps the sub-picture with the main picture. See
§ 5.6 for more details.
30
is used to display, minify or hide the sub-screen. See
§ 5.6 for information about picture-in-picture.
31
is used to make a bookmark during playback or time
shift.
32
is used to jump to next bookmark position or to jump
forward by 30 seconds.
33
is used to jump back 10 seconds for an instant replay.
It is also used to edit a recording.
34
is used to display the list of recorded programmes
that are stored on the internal hard disk drive. See
§
7.2
for more details.
35
displays the services list for sub-screen. It is also used
to specify a block for editing or for repeated playback.
The , , , and buttons have additional different
functions per menu besides their own function. They will be
guided by on-screen help.
1.3 What is common interface?
Some broadcasts are scrambled so that only paid
subscribers can enjoy them. Scrambled services
can only be viewed with a Conditional Access
Module (CAM) and a subscription card belong-
ing with the scrambling system.
Common Interface (CI) is the slot on a digitial
receiver into which a conditional access module
may be insterted. The front of the digital receiver
has two common interfaces.
To Next Page
Loading...
Need help?
General