USB
AUX OPTICAL COAXIAL HDMI DC
USB
AUX OPTICAL COAXIAL HDMI DC
Method 3.Connecting using an Optical cable
1. Connect the DIGITAL AUDIO IN(OPTICAL) jack on the Soundbar to the\
Optical OUT jack of the TV with a digital optical cable.
2. Press the button to switch to Optical mode, then the voice
announcement prompts"Optical Mode".
3. Set the TV's audio output to"PCM". (More information on PCM page)
Connect with TV
NOTE：
When you use the OPTICAL connection, please take care to remove the
protective sleeves at both ends of the cable before connecting.
Optical Cable included
Optical out
Method 4.Connecting using an AUX cable
Audio Cable included
AUX out
1. Connect the AUX Jack on the Soundbar to the headphone jack of the
TV with a 3.5mm cable.
2. The Soundbar will automatically switch to AUX mode, then the voice
announcement prompts"AUX Mode".
To Next Page
Loading...
Need help?
General