Need help?Do you have a question about the TORAIZ SP-16 and is the answer not in the manual?
Ensure your TORAIZ SP-16 has firmware version 1.40 or later.
Unzip the downloaded sound pack file to access its contents.
Access the PROJECT window on the TORAIZ SP-16.
Choose the 'OPEN' command within the PROJECT window.
Choose the desired project file to load from the list.
Access the UTILITY window on the TORAIZ SP-16.
Activate the USB mass storage mode for computer access.
Confirm the activation of USB mass storage mode.
General| Type | Sampler |
|---|---|
| USB | 1 x Type A, 1 x Type B |
| Sampling Rate | 44.1 kHz |
| A/D Converter | 24-bit |
| D/A Converter | 24-bit |
| Frequency Response | 20Hz-20kHz |
| Maximum Polyphony | 16 voices |
| Pads | 16 velocity-sensitive pads |
| Sequencer | 16-step |
| Touchscreen | 7-inch full-color touch screen |
| Internal Storage | 8 GB |
| Inputs | 2 x 1/4" TS (L/R) |
| Outputs | 1 x 1/4" TRS (phones) |
| Power Supply | AC adapter (included) |
| Tracks | 16 tracks |
| Weight | 7.1 lbs |
| Effects | Delay, Reverb |
| Connectivity | MIDI In/Out |
| Storage | USB storage |
To Next Page
