tormek SVS-50 - Sharpening and Re-Sharpening; Honing for a Mirror Finish

102
Hone both the sides alternately until the burr is removed
andthebevels are polished to a mirror finish.
Move the Universal Support to
the honing wheel and position
identically with the Setter.
Honing
Set the jig, JS. Mount the tool with
a fixed protrusion, P.
Set the Universal Support.
Use hole B.
Sharpening
Once you have created the shape of the edge it is an easy task to quickly re-sharpen the
tool. Do the three settings noted on the Prole Label carefully and you will obtain exactly the
same shape every time even when the stone wears and decreases in diameter.