3
12. Indoor use only, Do not use outdoor. Do not place the fan in or
near window. rain may create an electrical hazard.
13. To disconnect, grip plug and pull from wall outlet. Never yank
on cord.
16. To avoid fall down causes injury or damage, only operate the
unit after it is firmly mounted on a strong flat wall surface.
17. WARNING:To reduce the risk of fire or electric shock, DO NOT
use this fan with any solid-state speed control devices.
1. If the power cord is damaged, it must be replaced by the
manufacturer or its service agent or a similarly qualified person
in order to avoid a hazard.
2. This product employs overload protection (fuse). A blown fuse
indicates an overload or short-circuit situation. If the fuse
blows, unplug the product from the outlet. Replace the fuse as
per the user servicing instructions (follow product marking for
proper fuse rating) and check the product. If the replacement
fuse blows, a short-circuit may be present and the product
should be discarded or returned to an authorized service
facility for examination and/or repair.
3. Do not operate any fan with a damaged cord or plug. Discard
fan or return to an authorized service facility for examination
and/or repair.
4. Do not run cord under carpeting. Do not cover cord with throw
rugs, runners, or similar coverings. Do not route cord under
furniture or appliances. Arrange cord away from traffic area
and where it will not be tripped over.
POWER CORD & PLUG REQUIREMENTS:
To Next Page
Loading...
