40
The System Information is used for information purposes only and does not allow direct data entry. The
table below explains the data parameters of the form.
IP Address This is the IP Address of the device
MAC Address This is the MAC address of the device.
DNS Server This is the IP of the DNS server.
Proxy IP This is the IP Address or the Domain Name of the SIP proxy server
CallerID This is the Caller ID of the device. This number represents the device
number of the device.
Device Status This is the status of the device. There are two options for this parameter.
Not Registered and Registered according to the SIP Registration status. Usually the device requires
registration before making calls if its bind to a service provider.
Device Name This is the system name of the device.
Firmware version This is the firmware version currently installed on the device.
Configuration Version This is the configuration version of the device. The version is only updated
upon remote configuration via the auto provisioning functionality.
User Role This is the role of the currently logged user. There are two roles that are
supported: “user” and “admin”. The “admin” account can modify every device parameter, while the “user”
account can only modify small set of parameters to allow the normal device operation.
Current Time Shows the current time.
Uptime Shows the time since the last reboot.
To go to the screens that allow actual data entry the user must use the left navigation menu. Once clicked
the option opens the appropriate right dialog that allows data entry. All user sessions will be timed out after
10 minutes inactivity to allow high level of security. The “user” and the “admin” views of the system are
different so if one user logs in using the “admin” account, he/she will see much different data dialogs.
These data dialogs are explained in detail below.
To Next Page
Loading...
Need help?
General