To Next Page

To Previous Page

For DVB-C Cards:

#Transponder Name

TransponderType TransponderFrequency SymbolRate ErrorCorection Modulation

TransponderType – 'C' (default)

TransponderFrequency – transponder frequency

ErrorCorrection - 'AUTO' (default)

Modulation Types - 'QAM16' | 'QAM32' | 'QAM64' | 'QAM128' | 'QAM256'

Example:

#DVB-C Transponder Name and Description

C 12345 6789 AUTO QAM16

For DVB-S/S2 Cards:

#Transponder Name and Description

TransponderType TransponderFrequency Polarisation SymbolRate ErrorCorection LNBNumber

TransponderType - 'S' | ’S2’

TransponderFrequency – transponder frequency

Polarisation - 'V' vertical | 'H' horizontal

ErrorCorrection - '1/2' | '2/3' | '3/4' | '5/6' | '7/8'

LNBNumber – this is the LNB number. For DiSeqC (more than one LNB) number '1' | '2' | '3' | '4' , for a

single satellite dish '0'

Example:

#DVB-S Transponder Name and Description

S 11917000 V 27500000 3/4 0

S2 11632000 V 30000000 3/4 0

S2 11632000 V 30000000 3/4 1

DVB-C Transponder Management

This section supports configuration of DVB-C cable cards.

Transponder Name – this is the name of the transponder or service that is used.

Transponder Frequency – this is the cable transponder frequency in kHz.

Symbol Rate – this is the digital cable symbol rate in seconds (symbols/sec).

Tornado M80 User Manual

Questions and Answers: