Tornado M80 User Manual

59
Satellite Configuration
This section supports configuration of DVB-S/S2 cards.
Satellite – this option allows selection of pre-defined system satellites.
LNB Number – this option allows selection if this satellite is using specific LNB DiseqC capable.
LnbLofHi (MHz) – this is the high frequency for the LNB.
LnbLofLo (MHz) – this is the low frequency for the LNB.
LnbSwitchLof (MHz) – this is the threshold frequency between the low and high band of the LNB
operation.
Remote Configuration
This section supports configuration of DVB-C, DVB-S, DVB-T digital cards.
Use Remote Configuration – this checkbox will allow the device to use remote configuration.
Remote Config URL – this is the URL of the remote configuration for the transponder setup.
Examples of DVB-S and DVB-S2 transponder lists are located in the following files:
http://support.sysmaster.com/transponders/dvbs.ini
http://support.sysmaster.com/transponders/dvbs2.ini
http://support.sysmaster.com/transponders/transponder.tl
The DVB digital card configuration text file has the following file structure:

Tornado M80 Specifications

General

Brand	Tornado
Model	M80
Category	Set-top boxes
Language	English