Need help?Do you have a question about the tornos DECO 20/10 PTO and is the answer not in the manual?
Overview of Mono PTO machines and their technological progress.
Diagram illustrating the machine's axes and components.
Table listing machine axes and their corresponding descriptions.
Tables detailing axis travel limits and references for DECO20 and DECO26.
Lists the different spindles and their descriptions.
Tables showing maximum spindle speeds for DECO20 and DECO26.
Diagrams illustrating the kinematic relationships and dimensions of the machine.
Step-by-step procedure for part creation, covering study, computer, and machine phases.
Visual representation of part operations, including tool movements and offsets.
Template for defining and organizing machine operations and axis movements.
Explanation of tool identification principles.
Details the 5-digit numbering system for tools and its constituent parts.
Table mapping pin positions to used positions, tool numbers, axes, and gang positions.
Defines geometries for stationary and turning tools on mainwork gangs 1 and 2.
Defines geometries for frontwork attachment and cross backwork tools.
Defines geometries for turning cross and axial backwork gang tools.
Visual representation of tool placement for DECO20/26 PTO.
List and definitions of G Codes used for machine programming.
List and definitions of M Codes for machine operations.
To Next Page
General
