tornos SAS 16.6 User Manual

SAS 16.6
INSTRUCTION MANUAL
ENGLISH VERSION TRANSLATED FROM THE ORIGINAL VERSION
TORNOS SA CH-2740 MOUTIER
http://www.tornos.ch
Ref. : 300801_en – Printed in Switzerland - Copyright © 1999-2012
Caution!
Before handling the machine,
all users must read the and pay particular attention to the
"SAFETY INSTRUCTIONS" !
Keep this document for future reference.

tornos SAS 16.6 Specifications

General

Brand	tornos
Model	SAS 16.6
Category	Lathe
Language	English

Summary

Emergency Procedures

Raising the Alarm

Information to provide when raising an alarm for an emergency.

Accident Response

Steps for responding to an accident, including first aid.

Fire Response

Evacuation Procedure

Installation Conditions

Machine Identification

Machine Dimensions and Features

Physical size, technical features, and dimensional variations of the machine.

Safety Clearance

Minimum space required around the machine for safe operation, including peripherals.

Conditions of Use

Operating Environment

Air Extraction Specifications

Energy Supply Connection

Requirements for connecting the machine to electrical and pneumatic power supplies.

Installation Procedures

Work Environment

Unpacking Procedures

Installation Process

Warning that installation must be done by qualified personnel.

Alignment of Machine and Bar Feeder

Steps for aligning the machine and bar feeder.

Connecting Energy Supplies

Information on connecting electrical and pneumatic power.

Peripheral Options Connection

Pneumatic Connection Details

Requirements for supplying dry and oil-free air to the machine.

Machine Preparation and Movement

Moving the Machine