IDENTIFICATION AND ORDERING
MODEL AND SERIAL NUMBER
The mower has two identification numbers: a model
number and a serial number. The two numbers are
stamped into a plate that is riveted to the frame. In any
correspondence concerning the mower, supply the model
and serial numbers to assure that correct information and
replacement parts are obtained.
Note: Do not order by reference number if a parts
catalog is being used; use the part number.
To order replacement parts from an Authorized TORO
Service Dealer, supply the following information:
1. Model and serial numbers of the mower.
2. Part number, description and quantity of part(s)
desired.
32
Maintenance
To Next Page
Loading...
