2
Table of Contents
This operator's manual has instructions on safety, operation, and maintenance.
This manual emphasizes safety, mechanical and general product information. DANGER, WARNING and
CAUTION identify safety messages. Whenever the triangular safety alert symbol appears, understand the safe-
ty message that follows. “IMPORTANT” highlights special mechanical information and “NOTE” emphasizes
general product information worthy of special attention.
IDENTIFICATION AND ORDERING
MODEL AND SERIAL NUMBER
The model and serial number for the traction unit is on a plate that is mounted on the left front frame member.
The model and serial number for the cutting unit is on a plate that is mounted on the top front of the center cut-
ting unit. Use model and serial number in all correspondence and when ordering parts.
To order replacement parts from an authorized TORO Distributor, supply the following information:
1. Model and serial numbers of the machine.
2. Part number, description and quantity of parts desired.
NOTE: Do not order by reference number if a parts catalog is being used; use the part number.
Page
Safety 3
Specifications 9
Before Operating 11
Controls 13
Operating 17
Maintenance 28
To Next Page
Loading...
