Operating Instructions
26
Figure 24
Figure 25
Figure 26
Diagnostic ACE Display Functions
1. Overlay decal (English shown)
2. “Inputs Displayed” LED (Red)
3. “Outputs Displayed” LED (Green)
4. Toggle button
Using “Inputs Displayed” (Red Text)
1. LED is lit if the oil level is too high
2. LED is lit if the oil level is too high
3. LED is lit if the oil level is too high
4. LED is lit if the oil level is too high
5. LED is lit if a system air leak has been detected.
6. One or two LED’s are lit displaying the relative
position of the Turfdefender’s internal float.
7. “Inputs Displayed” LED “ON” (Red)
Normal Operation:
a. “Oil Level OK” LED lit
b. 1 or 2 LEDs are lit on the left column
Using “Outputs Displayed” (Green Text)
Normal Operation:
a. “Valve ON” LED lit steadily
b. “Self-Diagnostic” LED lit steadily
c. “DATA LINE” LED lit steadily
d. “Alarm ON” LED lit temporarily
Problem Diagnosed:
The appropriate LED will blink to identify the
problem.
To Next Page
Loading...
