21
1
2
3
4
Figure 28
1. Traction drive –neutral
2. Traction drive neutral &
reel drive off
3. Traction drive–engaged
(transport)
4. Traction drive & reel drive
engaged
3. Move traction lever to Engaged position, increase
throttle speed until the mower is traveling at the
desired ground speed, drive the mower out onto the
green area, lower the front of the mower down and
commence operation (Fig. 28).
After Mowing
1. Drive off green, move reel drive and traction control
levers to Disengage and stop the engine.
2. Empty the grass catcher of clippings, install grass
catcher and commence transport operation; refer to
Transport Operation, page 20.
To Next Page
Loading...
