Toro 07411EX User Manual

60 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

FormNo.3438-278RevA

Workman

®

GTXEFIUtilityVehicle

withExtendedChassis

ModelNo.07411EX—SerialNo.400000000andUp

Registeratwww.Toro.com.

OriginalInstructions(EN)

*3438-278*A

All manuals and user guides at all-guides.com

Table of Contents

Questions and Answers:

J
julie08Aug 25, 2025
What to do if the machine-status light flashed 3 times on my Toro Utility Vehicle?
- B
  Breanna AguilarAug 26, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 3 times, it indicates that the motor current exceeded the controller-rated maximum or there is an internal-power component fault. Turn the key switch to the OFF position, wait a few seconds, and then turn it back to the ON position. Check all batteries and high-current controller connections. If the condition continues, contact your Authorized Service Dealer.
A
amy35Aug 26, 2025
Why does the machine-status light flash 6 times on my Toro 07411EX?
- R
  ralphmillerAug 26, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 6 times, it means that the throttle is pressed while starting the machine or there is a wire that is not making a connection. Release the pedal, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation. Also, test the wiring between the controller and contactor, switches, and the status-indicator light.
R
robertwhiteAug 26, 2025
What does it mean when the machine-status light flashes 8 times on my Toro 07411EX Utility Vehicle?
- R
  robertshermanAug 27, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 8 times, it indicates that the controller or motor is overheated or too cold. Determine if the motor or controller is very hot or very cold, then allow the machine to return to safe temperatures before resuming normal operation.
N
Nathan LawrenceAug 27, 2025
What does it mean if the machine-status light flashed 5 times on my Toro 07411EX Utility Vehicle?
- J
  Jason YoungAug 27, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 5 times, it indicates that the maximum motor speed has been exceeded. Turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
M
Mark ChandlerAug 27, 2025
What to do if the machine-status light flashed 11 times on my Toro Utility Vehicle?
- K
  Kerri SmithAug 27, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 11 times, it indicates a motor-encoder fault or that the maximum motor speed has been exceeded. Check the motor-encoder (speed sensor) wiring. Additionally, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
B
billy19Aug 28, 2025
What does it mean if the machine-status light flashed 4 times on my Toro 07411EX Utility Vehicle?
- B
  Brooke ThomasAug 28, 2025
  If the machine-status light on your Toro Utility Vehicle flashes 4 times, it indicates a main-contactor fault. Test the contact wires, coil and contacts for normal operation.
K
Kimberly WestAug 28, 2025
What to do if the machine-status light flashed 2 times on my Toro 07411EX?
- C
  Catherine CarrilloAug 28, 2025
  If the machine-status light flashes 2 times, it could be due to the parking brake being engaged while in FORWARD or REVERSE, or a drive-switch fault. Ensure the parking brake is disengaged. If that's not the issue, turn off the machine and check the functionality of the switches.
M
Michael PhillipsAug 29, 2025
What to do if the machine-status light flashed 6 times on my Toro Utility Vehicle?
- J
  Jordan WaltonAug 29, 2025
  If the machine-status light flashes 6 times, it could be because the throttle is pressed while starting the machine or a wire is not making a connection. Release the pedal, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation. Also, test the wiring between the controller and contactor, switches, and the status-indicator light.
C
Colleen KingAug 29, 2025
What should I do if the machine-status light flashes 5 times on my Toro 07411EX?
- S
  stacy14Aug 29, 2025
  If the machine-status light flashes 5 times, it indicates that the maximum motor speed has been exceeded. Turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
P
Peter DudleyAug 30, 2025
Why does the machine-status light flash 8 times on my Toro Utility Vehicle?
- C
  Christopher GarnerAug 30, 2025
  The machine-status light flashes 8 times because the controller or motor is overheated or too cold. Determine if the motor or controller is very hot or very cold, then allow the machine to return to safe temperatures before resuming normal operation.

Toro 07411EX Specifications

General

Brand	Toro
Model	07411EX
Category	Utility Vehicle
Language	English

Related product manuals

Preview: Toro 07413LT

Preview: Toro 07433LT

Preview: Toro 07200

Preview: Toro 07205

Preview: Toro 07299

Preview: Toro 07059TC

Toro Workman 07040