What does it mean if the machine-status light flashed 11 times on my Toro 07411EX Utility Vehicle?
If the machine-status light flashes 11 times, it could mean a motor-encoder fault occurred or the maximum motor speed was exceeded. Check the motor-encoder (speed sensor) wiring. Additionally, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
What does it mean when the machine-status light flashed 4 times on my Toro 07411EX Utility Vehicle?
If the machine-status light flashes 4 times, it indicates a main-contactor fault. Test the contact wires, coil and contacts for normal operation.
What to do if the machine-status light on my Toro 07411EX flashes 7 times?
If the machine-status light flashes 7 times, it could mean the batteries have a low charge, are fully discharged, or the internal capacitor has a pre-charge of less than 5V. You should stop operation and slowly drive to the nearest charging station to fully charge the batteries. If the batteries are fully discharged, tow the machine to a charging station. Alternatively, fully charge the batteries, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation.
What does it mean if the machine-status light on my Toro 07411EX flashes 6 times?
If the machine-status light flashes 6 times, it could be due to the throttle being pressed while starting the machine or a wiring connection issue. Release the pedal, turn the key switch to the OFF position, wait a few seconds, turn the key switch to the ON position, and check for normal operation. Also, test the wiring between the controller and contactor, switches, and the status-indicator light.
What to do if the machine-status light on my Toro 07411EX flashes 8 times?
If the machine-status light flashes 8 times, the controller or motor might be overheated or too cold. Check if the motor or controller is very hot or very cold, then allow the machine to return to safe temperatures before resuming normal operation.
What to do if my Toro 07411EX Utility Vehicle shows error code P0226 or P156C?
General| Brand | Toro |
|---|---|
| Model | 07411EX |
| Category | Utility Vehicle |
| Language | English |
To Next Page
