Troubleshooting
31
PROBLEM CORRECTIVE ACTIONPOSSIBLE CAUSES
Machine does not drive.
1. Traction pump drive coupler
is loose or broken.
1. Contact Authorized Service
Dealer.
2. Hydro fluid level low.
3. Pump and/or wheel motor is
defective or damaged.
4. Control valve is defective or
damaged.
5. Relief valve is defective or
damaged.
6. Flow divider valve lever is in
9 o’clock position.
2. Add hydro fluid to reservoir.
3. Contact Service Dealer
4. Contact Service Dealer
5. Contact Service Dealer
6. Move lever to 12 o’clock to
10 o’clock position.
To Next Page
Loading...
