Toro 22321 User Manual

FormNo.3360-384RevB
TX427CompactUtilityLoader
ModelNo.22321—SerialNo.280000001andUp
ModelNo.22321G—SerialNo.280000001andUp
ModelNo.22322—SerialNo.280000001andUp
ToregisteryourproductordownloadanOperator'sManualorPartsCatalogatnocharge,gotowww.Toro.com.OriginalInstructions(EN)

Toro 22321 Specifications

General

Brand	Toro
Model	22321
Category	Compact Loader
Language	English

Summary

Safety

Safe Operating Practices

Guidelines for safe operation to prevent injury or damage.

Slope Operation

Crucial safety advice for operating on inclines to prevent tip-overs.

Stability Data

Model 22321 and 22321G

Model 22322

Safety and Instructional Decals

Product Overview

Controls

Familiarization with all operator controls before use.

Operation

Adding Fuel

Proper procedures and safety precautions for fueling the unit.

Filling the Fuel Tank

Checking the Engine Oil Level

Checking the Hydraulic Fluid Level

Starting and Stopping the Engine

Step-by-step guide to starting and stopping the engine.

Stopping the Traction Unit

Procedure for safely stopping the entire traction unit.

Moving a Non-functioning Traction Unit

Using the Cylinder Lock

Using Attachments

Important considerations when using attachments.

Installing an Attachment

Step-by-step guide for attaching implements to the unit.

Connecting the Hydraulic Hoses

Procedure for connecting hydraulic lines to attachments.

Removing an Attachment

Securing the Traction Unit for Transport

Maintenance

Recommended Maintenance Schedule(s)

A comprehensive schedule of all required maintenance tasks and intervals.

Premaintenance Procedures

Lubrication

Procedures for lubricating various components.

Greasing the Traction Unit

Engine Maintenance

Procedures for maintaining the engine.

Servicing the Air Cleaner

Servicing the Engine Oil

Procedures for checking and changing engine oil.

Changing the Oil

Changing the Oil Filter

Servicing the Spark Plugs

Fuel System Maintenance

Procedures for maintaining the fuel system.

Changing the Fuel Filter

Electrical System Maintenance

Procedures for maintaining the electrical system.

Servicing the Battery

Procedures for checking and maintaining the battery.

Charging the Battery

Drive System Maintenance

Procedures for maintaining the drive system.

Servicing the Tracks

Procedures for maintaining the traction unit's tracks.

Adjusting the Track Tension

How to adjust the tension of the tracks.

Replacing the Tracks (Models 22321 and 22321G)

Replacing the Tracks (Model 22322)

Belt Maintenance

Inspecting/Replacing the Drive Belt

Controls System Maintenance

Procedures for maintaining the control system.

Adjusting the Traction Control Alignment

How to align the traction control for proper function.

Adjusting the Traction Control Neutral Position

Adjusting the Tracking of the Traction Control, Full Forward Position

Hydraulic System Maintenance

Procedures for maintaining the hydraulic system.

Replacing the Hydraulic Filter

Changing the Hydraulic Fluid

Checking the Hydraulic Lines

Troubleshooting

The starter does not crank

Common causes and solutions for starter issues.

The engine will not start, starts hard, or fails to keep running.

Troubleshooting steps for engine starting and running problems.

Engine loses power.

The engine overheats.

The traction unit does not drive.