Toro 22321 - Installing an Attachment; Connecting the Hydraulic Hoses

warrantyofthetractionunitmaybevoidedifused
withunapprovedattachments.
Important:Beforeinstallingtheattachment,
ensurethatthemountplatesarefreeofanydirtor
debrisandthatthepinsrotatefreely.Ifthepinsdo
notrotatefreely,greasethem.
1.Positiontheattachmentonalevelsurfacewith
enoughspacebehindittoaccommodatethe
tractionunit.
2.Starttheengine.
3.Tilttheattachmentmountplateforward.
4.Positionmountplateintotheupperlipofthe
attachmentreceiverplate(Figure19).
Figure19
1.Mountplate2.Receiverplate
5.Raisetheloaderarmswhiletiltingbackthemount
plateatthesametime.
Important:Theattachmentshouldberaised
enoughtocleartheground,andthemount
plateshouldbetiltedallthewayback.
6.Stoptheengine.
7.Engagethequickattachpins,ensuringthattheyare
fullyseatedinthemountplate(Figure20).
Important:Ifthepinsdonotrotatetothe
engagedposition,themountplateisnot
fullyalignedwiththeholesintheattachment
receiverplate.Checkthereceiverplateand
cleanitifnecessary.
Figure20
1.Quickattachpins(shown
inengagedposition)
3.Engagedposition
2.Disengagedposition
Ifyoudonotfullyseatthequickattachpins
throughtheattachmentmountplate,the
attachmentcouldfalloffofthetractionunit,
crushingyouorbystanders.
Ensurethatyourquickattachpinsarefully
seatedintheattachmentmountplate.
ConnectingtheHydraulicHoses
Iftheattachmentrequireshydraulicsforoperation,
connectthehydraulichosesasfollows:
1.Stoptheengine.
2.Movetheauxiliaryhydraulicsleverforward,
backward,andbacktoneutraltorelievepressure
atthehydrauliccouplers.
3.Movetheauxiliaryhydraulicsleverintothereverse
position.
4.Removetheprotectivecoversfromthehydraulic
couplersonthetractionunit.
5.Ensurethatallforeignmatteriscleanedfromthe
hydraulicconnectors.
20