GEAR DRIVE
5 - 4 260 Series Tractor Service Manual
2. Install the four bolts through the right and left
torque straps and tighten (Figure 181).
Figure 181
MVC-258X
3. Engage the clutch pedal and reinstall the drive
belt around the transaxle input pulley (Figure 182).
Figure 182
MVC-259X
4. Install the cotter pin and washer connecting the
shift rod to the transaxle shift bracket (Figure 183).
Figure 183
MVC-249X
5. Install the cotter pin connecting the brake rod to
the brake lever (Figure 184).
Figure 184
MVC-248X
To Next Page
Loading...
