260 Series Tractor Service Manual 5 - 11
GEAR DRIVE
18. Connect the idler spring to the frame bracket
(Figure 204).
Figure 204
MVC-268X
19. Adjust the front idler belt guides (located on the
right side of the engine drive pulley) within 1/8”
(3mm) from the belt. Adjust the belt guide located
on the left side of the engine drive pulley so it is
within 1/8” (3mm) from the belt (Figure 205).
Figure 205
MVC-279X
20. Reconnect the electric PTO and route the battery
drain tube through the tie strap (Figure 206).
Figure 206
MVC-264X
21. Connect the tie rod ends to the steering arms
(Figure 207).
Figure 207
MVC-280X
To Next Page
Loading...
