Toro 30873 - Hauling the Machine; Pushing or Towing the Machine

SecuringtheCuttingUnits
1.EnsurethatthePTOisdisengaged.
2.Parkthemachineonalevelsurface.
3.Engagetheparkingbrake.
4.Fullyraisethecuttingunits.
5.Alignthelanyardtothecarriershaftofthelift
armfortheforwardouter-cuttingunit(Figure26).
g225483
Figure26
1.Carrier-shaftgroove
(forwardouter-liftarm)
2.Lanyardloop
6.Sliptheloopinthelanyardoverthecarriershaft
untilthelanyardisfullyseatedinthegroovein
theshaft(Figure26).
7.Repeatsteps5and6fortheforward
outer-cuttingunitattheothersideofthe
machine.
Important:Removethelanyardsfromthecarrier
shaftsbeforeloweringthecuttingunits
StowingtheLanyards
Note:Stowthelanyardswhenyouarenotusing
them.
1.EnsurethatthePTOisdisengaged.
2.Parkthemachineonalevelsurface.
3.Engagetheparkingbrake.
4.Withthecuttingunitslowered,sliptheloopof
thelanyardintotheslotinthereinforcement
plateoftherollersupport(Figure27).
g225485
Figure27
1.Reinforcement-plateslot
(rollersupport)
2.Lanyardloop
HaulingtheMachine
•Usecarewhenloadingorunloadingthemachine
intoatraileroratruck.
•Usefull-widthrampsforloadingthemachineinto
atraileroratruck.
•Tiethemachinedownsecurely.
PushingorTowingthe
Machine
Inanemergency,themachinecanbemoved
forwardbyactuatingthebypassvalveinthe
variable-displacementhydraulicpumpandpushingor
towingthemachine.
Important:Donotpushortowthemachine
fasterthan3to4.8km/h(2to3mph),because
youmaydamagethetransmission.Thebypass
valvesmustbeopenwheneveryoupushortow
themachine.
1.Openthehoodandlocatethebypassvalves
(Figure28)onthetopofpump,behindthe
batteryandstorageboxes.
36