Toro 30873 - Replacing the Hydraulic Filters; Checking the Hydraulic Lines and Hoses

ReplacingtheHydraulic
Filters
ServiceInterval:Aftertherst200hours
Every800hours
UseTororeplacementltersPartNo.94-2621for
therear(cuttingunits)ofthemachineandPartNo.
75-1310forthefront(charge)ofthemachine.
Important:Usinganotherltermayvoidthe
warrantyonsomecomponents.
1.Tilttheoperator’sseattoaccessthe
mower-pressurelter;refertoAccessingthe
HydraulicLiftCompartment(page42)
g201858
Figure77
2.Replacethechargehydrauliclteratthe
hydraulicliftcompartmentasshowninFigure
78.
g036709
g031621
Figure78
3.Lowerandsecuretheoperator’sseat.
4.Replacethereturnlterattherightsideofthe
machine(Figure78).
5.Starttheengineandletitrunforabout2minutes
topurgeairfromthesystem.Shutofftheengine
andcheckforleaks.
CheckingtheHydraulic
LinesandHoses
ServiceInterval:Beforeeachuseordaily
Inspectthehydrauliclinesandhosesdailyfor
leaks,kinkedlines,loosemountingsupports,wear,
loosettings,weatherdeterioration,andchemical
deterioration.Makeallnecessaryrepairsbefore
operatingthemachine.
62