Toro 30873TE - Page 5

g027293
Figure5
1.Flowdivider
4.Pressurehose(straight
end)
2.Pressurehose(angled
end)
5.Hydraulicpump
3.Rear-tractiontube
(forwardtting)
6.Forward
3.Removethetemporarycapfromthehydraulic
pump.
4.Threadthestraightendofthepressurehose
intothettinginthehydraulicpump(Figure5).
5.Removethetemporarycapfromtheowdivider.
6.Threadtheangledendofthepressurehoseinto
thettinginthesideoftheowdivider(Figure
5).
7.Tightenthehosettingsto150to184N⋅m(110
to136ft-lb).
InstallingtheCrossTube
1.Removethecaponthettingoftherear-traction
manifoldthatyoupreviouslyinstalled.
2.Alignthetubenutsforthecross-manifoldtubeto
thettingsintherear-tractionmanifoldandthe
owdivider(Figure6).
g021296
Figure6
1.Rear-tractionmanifold
4.Flowdivider
2.Cross-manifoldtube
(rear-tractionmanifold
tting)
5.Forward
3.Cross-manifoldtube
(dividertting)
3.Threadthetubenutsontothettingsinthe
owdividerandtherear-tractionmanifold,and
tightenthenutsto51to63N⋅m(37to47ft-lb).
5