Toro 30873TE - Page 4

InstallingtheHydraulic
Components
InstallingtheFlow-divider
Manifold
1.Aligntheholesintheow-dividermanifoldwith
theholesinthechassisbracket.
Note:Ensurethatthe45°ttingispointing
downandtowardthebackofthemachine.
g021286
Figure3
1.Bolt4.Flangenuts
2.Flow-dividermanifold
5.Up
3.Chassisbracket
6.Forward
2.Securetheow-dividermanifoldtothechassis
bracketwiththe2boltsand2angenuts.
InstallingtheRear-tractionTube
andthePressureHose
1.Aligntheforwardtubenutfortherear-traction
tubewiththeelbowttingintheowdivider
(Figure4andFigure5).
g021294
Figure4
1.Traction-motortube7.Hydraulicpump
2.Dividertube8.Rear-tractiontube
3.Hydraulic-ltertube
9.Flowdivider
4.Rear-tractionmanifold
10.Tractionmotor
5.Cross-manifoldtube
11.Forward
6.Pressurehose
2.Threadtheforwardtubenutontotheelbow,and
tightenthenutto51to63N⋅m(37to47ft-lb).
4