6
Safety and Instruction Decals
Safety decals and instructions are easily visible to the operator and are located near any area
of potential danger. Replace any decal that is damaged or lost.
53-7670
1. Cutting/dismemberment
hazard in auger
63-3050
66-6860
68-9390
1. Move wheels to the rear
2. Shift the transmission to
neutral
3. Push the lock spring up to
disengage from the shaft
groove; then slide the
coupling to the desired
position.
94-8079
99-3230
1. Chute direction control
2. Forward drive speed settings
3. Neutral setting 4. Reverse drive speed
settings
5. Start the engine
6. Stop the engine
To Next Page
Loading...
