7
Tecumseh Part No. 36501
1. Primer
Tecumseh Part No. 37119
1. Warning—hot surface; do not touch
Tecumseh Part No. 37226
1. Key ignition
2. Engage to start the
engine
3. Disengage to stop the
engine
4. Fast
5. Increasing scale
6. Slow
7. Stop the engine
Assembly
Note: Determine the left and right sides of the machine from the normal operating position.
Loose Parts
DESCRIPTION QTY. USE
Flange-head bolts—3/4 in. (1.9 cm) 6
Lower belt cover 1
Installing the auger/impeller housing
Flange-head bolts—1/2 in. (1.3 cm) 5
Installing the auger/impeller housing
Cable cover 1
Shift rod 1
Locknuts 2
Installing the shift rod
Discharge chute 1 Installing the discharge chute
Worm gear 1
Gear bracket 1
Carriage bolt 1 Installing the chute control gear
Flat washer 1
Locknut 1
To Next Page
Loading...
