Toro 51480 - Operation; Connecting to a Power Source; Starting the Trimmer; Stopping the Trimmer

3
AdjustingtheTrimmerHeightandBase
Orientation
NoPartsRequired
•T oadjusthandleheight,iptheauxiliaryhandlelatch,slideitup
ordowntothedesiredheight,thensecureitinplacebyclosing
thelatch(Figure3).
G015655
Figure3
1.Auxiliaryhandle3.Heightadjustmentlatch
2.Auxiliaryhandlelatch
•T oadjustthetrimmerheight,opentheheightadjustmentlatch,
thenslidetheshaftupordowntodesiredheight,securingitin
placewiththelatch(Figure3).
•T oadjusttheorientationofthebase,pressdownontherotator
buttonlocatedatthebaseoftheshaft,thenmovethebasetoface
thedesireddirection(Figure4).
1
G015683
Figure4
1.Rotatorbutton
Operation
ConnectingtoaPowerSource
WARNING
Ifyoudonotfullyseattheextensioncordontheinletplug,the
looseplugcouldleadtooverheatingandcauseare,possibly
burningyouorothers.
Ensurethatyoufullyseatthecordontheplugandusethecord
lockfeaturetosecurethecord.
NOTICE!Donotuseadamagedcord.
1
2
Figure5
1.Inletplug2.Extensioncord
StartingtheTrimmer
Tostartthetrimmer,slidethelockswitchbacktotheOnposition,then
squeezethetrigger(Figure6).
1
2
G015658
Figure6
1.Lockswitch2.Trigger
StoppingtheTrimmer
Tostopthetrimmer,releasethetrigger.
AdvancingtheLine
Note:Thetrimmerisequippedwithanauto-feedhead.
1.Withthetrimmerrunning,releasetheswitchtrigger.
2.Waittwoseconds,thenpresstheswitchtrigger.
Note:Thelinewillextendapproximately1/4in.(6mm)witheach
stopandstartoftheswitchtrimmeruntilthelinereachesthelength
ofthegrassdeectorblade.
3.Resumetrimming.
5