To Next PageTo Next PageHow to prevent grass wraps around the Trimmer head assembly and the attachment shaft of my Toro 51934B Trimmer?
To prevent grass from wrapping around the trimmer head assembly and attachment shaft of your Toro Trimmer, cut tall grass from the top down and operate the product at full throttle.
What to do if the line will not advance on my Toro Trimmer?
If the line on your Toro Trimmer won't advance when using automatic line lengthening, consider these possible causes: * The line may be welded to itself. If so, lubricate it with silicone spray. * There might not be enough line on the spool. Install more line. * The line could be worn too short. Pull the line while alternately pressing down on and releasing the retaining cap. * The line may be tangled on the spool. Remove the line and rewind it. * The engine speed may be too slow. Advance the line at full throttle.
Why Toro Trimmer engine does not reach full speed and emits excessive smoke?
If your Toro Trimmer engine doesn't reach full speed and emits excessive smoke, ensure you're using fresh fuel and the correct 2-cycle oil mix. Also, check and clean the air filter and the spark arrestor screen, as they may be dirty.
What to do if the line will not advance when using automatic line lengthening on my Toro Trimmer?
If the line on your Toro Trimmer won't advance automatically, try these steps: First, lubricate the line with silicone spray if it seems welded together. If there's not enough line, install more. If the line is too short, pull it while pressing and releasing the retaining cap. If the line is tangled, remove it from the spool and rewind it. Lastly, make sure the engine is at full throttle when advancing the line.
Why does oil drip from the muffler of my Toro 51934B Trimmer?
If oil drips from the muffler of your Toro Trimmer, operate the product at full throttle. Also, ensure you are using fresh fuel and the correct 2-cycle oil mix, and check to see if the air filter is dirty and clean it if needed.
How to fix retaining cap hard to turn when using automatic line lengthening on Toro Trimmer?
If the retaining cap on your Toro Trimmer is hard to turn when using automatic line lengthening, clean the screw threads and lubricate them with grease. If this doesn't solve the problem, replace the retaining cap.
Why does my Toro 51934B engine not reach full speed and emits excessive smoke?
If your Toro Trimmer engine does not reach full speed and emits excessive smoke, check the following: 1. **Fuel mixture:** Use fresh fuel and the correct 2-cycle oil mix. 2. **Air filter:** Clean the air filter. 3. **Spark arrestor:** Clean the spark arrestor screen.
How to prevent grass from wrapping around the Toro 51934B head?
If grass wraps around the trimmer head assembly and the attachment shaft of your Toro Trimmer, consider these solutions: 1. If you are cutting tall grass at ground level, cut it from the top down. 2. If you are operating the product at part throttle, operate it at full throttle.
Why is oil dripping from the muffler of my Toro Trimmer?
If oil drips from the muffler of your Toro Trimmer, here's what you should check: 1. Ensure you are operating the product at full throttle. 2. Verify you are using fresh fuel and the correct 2-cycle oil mix. 3. Make sure the air filter is clean.
General| Power Source | Gas |
|---|---|
| Line Diameter | 0.095 inches |
| Line Feed | Bump Feed |
| Engine Type | 2-Cycle |
| Engine Displacement | 25.4 cc |
| Cutting System | Dual Line |
| Shaft Type | Straight |
Details on safely handling and mixing gasoline for the product.
Instructions for starting the engine when cold versus warm.
Steps to correct a flooded engine condition.
Space to record model and serial numbers for service.
Explanation of signal words like DANGER, WARNING, CAUTION, Important, and Note.
Covers operator condition, clothing, protective gear, and stance.
Inspecting the product, attachment, and work area before use.
Rules for fueling, exhaust, work area, and controlling the product.
Explains symbols related to safety, reading the manual, and protection.
Specifies the type of gasoline and oil mixture required for the engine.
Defines DANGER, WARNING, and CAUTION signal words and their risk levels.
Emphasizes professional service and wearing eye protection.
Label detailing cold and warm engine starting procedures.
Labels showing safety warnings, bystander distance, and choke positions.
Details engine size, durability, cutting width, and line size.
Lists the weight of different model numbers of the trimmer/brushcutter.
Outlines the intended uses for the trimmer and brushcutter.
Describes engine, dual line, grass deflector, and ergonomic design.
Details features like grass barrier, blade, guard, strap, and barrier bar.
Steps for carefully removing and inspecting the product from the box.
Lists all components included in the product packaging.
Steps to connect the upper and attachment shafts and attach the front handle.
Instructions for attaching the shoulder strap to the brushcutter.
Instructions for attaching the grass deflector for curved and straight shaft models.
Steps to remove the blade, guard, and flanged washer.
Procedures to attach the grass deflector and trimmer head.
Steps to remove the trimmer head assembly and grass deflector.
Procedures to attach the brushcutter guard and blade.
Detailed instructions for mixing gasoline and 2-cycle oil with a chart.
Steps for safely filling the fuel tank, including warnings.
Instructions for starting a cold or warm engine.
Simple steps to turn off the engine and product.
How to hold and operate the curved shaft trimmer.
How to hold and operate the straight shaft trimmer.
Method for extending the trimmer line during operation.
How to hold and operate the brushcutter for effective cutting.
Advice on cutting techniques and avoiding damage to the product or surroundings.
Table outlining maintenance intervals for emission-related parts.
Instructions for cleaning the exterior, air intake vents, and spool area.
General advice on checking fasteners and replacing damaged parts.
Step-by-step guide to replace the trimmer line.
Instructions for removing and installing a new trimmer spool.
Inspecting the fuel cap for leaks and proper function.
Detailed steps for cleaning and oiling the air filter.
How to locate, remove, and clean the spark arrester screen.
Steps for removing and installing a new spark plug.
Procedures for short-term and long-term storage.
Guidelines for safely moving the product.
Common causes and solutions for engine starting issues.
Addresses issues like low speed, excessive smoke, and oil drips.
Solutions for line not advancing or retaining cap being hard to turn.
How to handle grass wrapping and cutting tall grass.
Outlines the terms, duration, and coverage of the product warranty.
Instructions on how to get warranty repairs and what is covered.
Lists items and conditions not covered by the warranty.
Explains the emissions warranty coverage and owner's responsibilities.
Details owner's maintenance duties and warranty limitations.
Provides contact details for locating authorized service dealers.
